Insertion type plastic pipe flowmeter (short pipe with 304 guide rod with upper limit alarm)

Overview.

Panel (pipe) type flowmeter is also a float (or float) flowmeter, measuring tube selection of high-quality transparent organic glass. Mainly used in water purification treatment and environmental protection engineering support, can also be used in chemical, petroleum, light industry, medicine, fertilizer, food, paper and scientific research departments, used to measure the flow of liquid single-phase non-pulsating.

Panel pipe type flowmeter has the characteristics of high transparency, intuitive reading, not easy to break, light weight, long life, easy installation and connection.

◆Product implementation standard: Q/YHC.0101-2013 (enterprise standard)

◆Plastic tube flowmeter flange standard: HGT21561-94 (Ministry of Chemical Industry standards)

Installation and precautions.

1. Before installation, the flowmeter export receiver should be taken apart to remove the foam or plastic pipe support inside the instrument, and then reinstall the receiver on, pay attention to the "O" seal should be installed in the receiver groove when reinstalled to prevent water leakage.

2. flowmeter interface available matching plastic pipe (UPVC), with special glue bonding connection. Can also be connected with the plastic flange first, and then connected with the metal flange.

3. The flowmeter must be installed vertically (the angle between the center of the flowmeter and the plumb line does not exceed 5), the installation height should be easy to read the float, read the line of sight should be level with the float reading position.

4. flowmeter upstream and downstream import and export of straight pipe section should be ≥ 5 times the nominal diameter of the instrument.

5. Such as the measured fluid contains larger particles of impurities or spoils, should be installed in the flowmeter upstream filter.

6. Such as the measured fluid is pulsating flow, resulting in float fluctuations can not be measured properly, the flowmeter upstream should be set up the appropriate size of the buffer and the fixed value.

7. Try to use the flowmeter good flow section test flow (good flow section is generally 40%-70% of the larger flow).

量程是指电磁流量计的检测范围能够满足现场的规定，这个数据是较为重要的，量程太大或太小，都对电磁流量计有直接的影响，甚至无法使用。电磁流量计简述电磁流量计是一款高精高效，性能稳定的智能型电磁流量计，感应器选用非均匀磁场技术及特殊的等效电路构造，磁场平稳可靠，并且极大的缩小了体积，缓解了净重，使流量计微型化。

适用于准确和平稳测量封闭管道中导电液体和浆液的瞬时流量、累计流量和流速，如：洁净水、废水、生活水、源水，各种酸、碱、盐等溶液，沙浆、煤浆、纸桨及其食品方面的液态等，塑管流量计规格广泛应用于冶金、造纸、水处理、化工、轻工、纺织、食品及饮料、餐饮、农田灌溉、水电站、油田、电力和采矿等领域。