All stainless steel glass float flowmeter

Overview.

LZB/10D, 15D, 20D, 25D, 30D glass float flowmeter, citing foreign advanced technology, panel mounting, with flow control valve, its small size, lightweight structure, beautiful appearance, safe and reliable, simple installation. Suitable for working under lower pressure.

Installation and precautions.

◆ Flowmeter out of the box, should be carefully checked, has confirmed no damage during transportation.

◆The flowmeter must be installed in a vertical position (the angle between the center of the flowmeter and the plumb line does not exceed 5 degrees) and properly supported to prevent any stress transfer.

  For new installation pipeline in the installation of the flowmeter before the pipe should be flushed clean. Installation inlet is always at the smallest end of the cone pipe, that is, the smallest digital end of the connection.

◆In order to facilitate the replacement of parts during use, the flowmeter should be installed with sufficient space around it.

◆When the flowmeter is in use, the regulating valve should be opened slowly to prevent the float from hitting the glass tube with a sudden upward stroke and damaging the glass tube.

◆Float reading position for the float at the largest outer diameter.

◆The measured fluid and state (temperature, pressure) and the flowmeter index is not consistent, the value must be corrected according to the fluid and state at the time of use.

  In the use of the process of cone tube and float stained should be cleaned in time.

◆ Periodically check the error of the flowmeter. Once the error exceeds the specified, should follow the float and glass tube or recalibration.

系统实施试：电磁流量计在进行完单项作用试压检测，控制主机各类准备调试完成后，可开展系统调试。油性物质管路需开展干躁后才可进入待测物质开展系统运行。系统调试时，主机应事先对每个测点开展编号扫描，保证各仪表部件均在正常运行状态后才可开展功能性调试。

功能性调试时，由软件系统对各仪表各自开展参数的读取，临界点警报实验等，随后开展控制参数的写入，逐一开展调试，并把有关数据发送至有关上位机进行分析。怎样对电磁流量计开展基本参数一般电磁流量计参数都是必须设定的，可是很多人都不清楚电磁流量计应当怎么才能设定其参数，现在涡街流量计生产厂家就跟大家简易说下电磁流量计是怎样来设定参数的。一般的参数都是设置在一定的范围内，不同的厂家是有一定的区别，这个要以商品的说明书为准，电磁流量计感应器在即时测量流体电阻值来做判断的。